Transmission Crane OperatorInstall, operate and maintain the Company's electric transmission system under direct supervision; operate tools and equipment necessary to accomplish the work; perform other related duties as required or assigned. Work on wood, steel poles and towers up to 200 feet. Use of Live Line Tools on 12kV-500kV and rubber gloving method may be used up to 12kV. Bare Hand techniques may be utilized on 69kV-500kV. Work may be performed from structure or aerial lift truck. Will operate mechanized line truck or other trucks. Install, maintain and repair electric transmission and distribution OH lines and equipment up to 500 kV. Install, maintain and repair electric transmission and distribution UG Cable and equipment up to 230kV. Erect and climb poles and steel structures. Install crossarms, insulators, conductors, switches and other equipment.
Climb and descend 100-foot wooden pole wearing four-pound metal climbing gaffs on each boot plus body belt with tools weighing 25 pounds
Climb and descend 200-foot steel poles and lattice towers
Attach one end of 28-pound jumper cable onto a conductor with eight-foot fiberglass hotstick - requires standing in climbing gaffs on wooden pole while supported by body belt/safety strap and rotating torso 60degrees, extending hotstick out and above the shoulders at approximately 45-degree angle
Lift onto mounting bolt from belt height an assembled 10-foot crossarm weighing 80 pounds with hardware while standing in climbing gaffs on pole supported by body belt and safety strap
Remove substructure covers - round metal manhole cover up to 108 pounds (lifting tool for manhole)
Work inside substructures
Stringing conductors and pulling cable
Replacing wood, steel and lattice structures
Operate and drive assorted pieces of large equipment
Lift and carry 60-75 pound tools, materials or equipment while aloft or traversing uneven terrain
Work in a variety of terrain, weather and other conditions including ambient temperatures up to 110 degrees Fahrenheit
Work in daylight and at night with limited auxiliary lighting. Periodically work extended overtime shifts
Work in and around helicopters
Operate Cranes: Safely operate various types of cranes (e.g., lattice boom, tower cranes) to lift, move, and position materials and equipment for transmission line projects.
Conduct pre-operation inspections and maintenance checks on cranes to ensure equipment is in proper working condition. Report any issues or malfunctions to the maintenance team.
Coordinate with ground crew to load and unload materials and equipment. Ensure proper rigging and securing of loads to prevent accidents and damage.
Follow all safety regulations, company policies, and industry standards. Use personal protective equipment (PPE) and ensure that safety measures are in place for all operations.
Maintain clear communication with project managers, signal persons, and ground crew to coordinate movements and ensure accurate placement of materials.
Maintain accurate records of crane operations, including load charts, inspection reports, and daily logs.
Be prepared to respond to emergencies, including equipment malfunctions or accidents, following established emergency procedures.
Stay current with training on crane operation, safety practices, and industry regulations. Participate in ongoing training as required.
Strong understanding of crane operation, load charts, rigging, and safety procedures.
Ability to work in various weather conditions, lift and maneuver heavy materials, and perform physically demanding tasks.
Excellent verbal communication skills and the ability to work collaboratively with a team.
Strong attention to detail and commitment to maintaining safety and operational standards.
Work is performed both outdoors and in varying weather conditions. The role may require working at heights or in confined spaces.
